Dimensions
4.5" x 2.0" x .875" (114mm x 50.8mm x 22.2mm)
Opening your find
Dimensions4.5" x 2.0" x .875" (114mm x 50.8mm x 22.2mm)
Weight112g (0.25 lb)
ManufacturerInsteon
Manufacturer Product No.2475F - (Each)
Insteon ID1
Scenes2 responder groups
The Insteon FanLinc Dual-Band Ceiling Fan and Light Controller lets you easily integrate both fan speed and light control within your Insteon network. It is a dual-load responder simultaneously acting as a light fixture dimmer plus a 4 speed fan controller (Off, Low, Medium & High).
Features
Add your ceiling fan to your Insteon network
The Insteon FanLinc Dual-Band Ceiling Fan and Light Controller lets you easily integrate your ceiling fan and lights within your Insteon network to control your fan speed and adjust the brightness of the attached lights all from your smartphone.
2-in-1 dimmer and fan speed controller
The Insteon FanLinc Dual-Band Ceiling Fan and Light Controller is a dual-load responder, so it acts as a light fixture dimmer and fan speed controller.
Full Dimming Control
The Insteon FanLinc Dual-Band Ceiling Fan and Light Controller offers full dimming control of your lights.
4 Fan Speeds
The Insteon FanLinc Dual-Band Ceiling Fan and Light Controller offers 4 fan speeds (Off, Low, Medium & High) to suit your needs.
COMPATIBILITY
Works with
*
*When connected to the Insteon Hub
Compatible with ceiling fans with an AC motor. Ceiling fans with DC-motor and built-in remote control motors are not compatible.
SPECS
Technical Specifications
Manufacturer: Insteon
Manufacturer Product No.: 2475F - (Each)
Warranty: 2 Years
Insteon ID: 1
Scenes: 2 responder groups
Maximum Scene Links: 400 (combined controller + responder)
Scene Commands Supported as Responder:
On | Off
Brighten | Dim
Fast On | Fast Off
Software Configurable: Yes
Ramp Rates (full-ON to full-OFF):
0.125 to 9 seconds if programmed locally,
0.125 seconds to 8 minutes if programmed remotely via software
RF Range: 100 ft. (depending on your home’s construction)
Beeper: Yes
Operation - Light Dimmer
Insteon: Scene/Group 1
Brightness Levels: 32
Dimmer Control:
On | Off
Fast On | Fast Off
Dim | Brights
LED Dual Color:
Green & Red
Green = On
Red = Off
Setup = Varies
Set Button: Black
Operation - Fan Control
Insteon: Yea
Fan Speeds: 4 (Off, Slow, Medium & Fast)
Fan Control:
On | Off
Fast On | Fast Off
Dim | Brights
Brightness:
Off
1% - 49%
50% - 99%
100%
Fan Is: Off | Slow | Medium | Fast
LED:
Dual Color, Green & Red Green = On
Red = Off
Setup = Varies
Set Button: Black
Wires: 4, 16 gauge
Wire Colors:
Black - Hot / Line
Blue - Light / Load
Red - Fan / Load
White - Neutral
Case Color: White
Plastic: UV Stabilized ABS
Dimensions: 4.5" x 2.0" x .875" (114mm x 50.8mm x 22.2mm)
Weight: 112g (0.25 lb)
Operating Environment: Indoors
Retains all settings without power: Yes, all saved in Non-volatile EEPROM
Voltage: 120VAC, Single Phase
Frequency: 60Hz
Maximum Dimmer Load: 300 Watts
Lighting Load Types: Incandescent only
Maximum Fan Load: 1 Amp
Standby Power Consumption: < 1 Watt
Safety Approved: ETL
Includes:
1x - Insteon Ceiling Fan and Light Controller Module
1x - Quick Start Guide
1x - Cable Tie
4x - Wire Nuts
INSTALLATION
Installation Guide
Wiring with Keypad
Owner's Manual
| Manufacturer | Insteon |
|---|---|
| Manufacturer Product No. | 2475F - (Each) |
| Warranty | 2 Years |
| Insteon ID | 1 |
| Scenes | 2 responder groups |
| Maximum Scene Links | 400 (combined controller + responder) |
| Software Configurable | Yes |
| RF Range | 100 ft. (depending on your home’s construction) |
| Beeper | Yes |
| Insteon | Scene/Group 1 |
| Brightness Levels | 32 |
| Set Button | Black |
| Fan Speeds | 4 (Off, Slow, Medium & Fast) |
| Fan Is | Off | Slow | Medium | Fast |
| Wires | 4, 16 gauge |
| Case Color | White |
| Plastic | UV Stabilized ABS |
| Dimensions | 4.5" x 2.0" x .875" (114mm x 50.8mm x 22.2mm) |
| Weight | 112g (0.25 lb) |
| Operating Environment | Indoors |
| Retains all settings without power | Yes, all saved in Non-volatile EEPROM |
| Voltage | 120VAC, Single Phase |
| Frequency | 60Hz |
| Maximum Dimmer Load | 300 Watts |
| Lighting Load Types | Incandescent only |
| Maximum Fan Load | 1 Amp |
| Standby Power Consumption | < 1 Watt |
| Safety Approved | ETL |
4.5" x 2.0" x .875" (114mm x 50.8mm x 22.2mm)
112g (0.25 lb)
Insteon
2475F - (Each)
No reviews available here yet.
Tell us what you’d change, or start with a new idea.